8
from vinyl or linoleum floors, you can pre-treat them with a mild detergent and some
water before using the steam mop.
STEAM CLEANING
• Place a cleaning pad (6) on the floor with the ‘hook & loop’ side facing up.
•
Lightly press it down onto the cleaning pad.
• Plug the steam mop electric cord into the outlet.
• Press the ON/OFF button (1). It takes approximately 15 seconds for the steam mop to heat up.
• Press the
SmartSelect
TM
button (2) until the required setting is reached.
• Pulling the handle tube (
4) back will activate the steam pump. After a few seconds
steam will start to come out of the steam head.
NOTICE:
If the system has been run dry it may take up to 30 seconds to prime the
system on first use.
• It takes a few seconds for steam to enter the cleaning pad. The steam mop will now
glide easily over the surface to be sanitized/cleaned.
•
Push and pull the steam mop slowly across the floor to thoroughly steam clean each section.
NOTICE:
During use you may turn off the steam pump by returning the handle to the
upright position, this convenient feature will allow you to put the steam mop down for a
short time so that you may move items of furniture, then continue cleaning without the
need to switch the appliance off.
AFTER USE - Fig. K
• Return the handle tube (4) to the upright
position and turn the steam mop ‘OFF’.
• Wait until the steam mop cools down.
(approximately five minutes)
• Unplug the steam mop from the wall outlet.
• Empty the water tank (3).
• Remove the cleaning pad (6) and wash it so
that it is ready for the next use. (Take care
to follow the wash care instru
ctions printed
on the cleaning pad).
• Wrap the electric cord around the cord hooks (21 & 22).
NOTICE:
The top cord hook rotates to easily release the cord ready for next use.
NOTICE:
With the handle tube in the upright position, the cord neatly wrapped
around the cord hooks, your steam mop will stand on its own for storage. Alternatively
there is a hanging bracket built into the hand grip which will allow your steam mop to be
hung from a suitable hook on the wall. Always ensure that your wall hook is capable of
supporting the weight of the steam mop safely.
MAINTENANCE AND CLEANING
Your BLACK+DECKER corded appliance has been designed to operate over a long
period of time with a minimum of maintenance. Continuous satisfactory operation
depends upon proper appliance care and regular cleaning.
WARNING:
Before performing any maintenance or cleaning on corded appliances
switch off and unplug the appliance.
• Clean your appliance using a soft damp cloth. Never let any liquid get inside the
appliance; never immerse any part of the appliance into a liquid.
IMPORTANT:
To
assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment
should be performed by authorized service centers or other qualified service
organizations, always using identical replacement parts.
•
For stubborn marks you can use a mild solution of soap and water to dampen your cloth.
CARE OF THE CLEANING PADS
NOTICE:
Follow the cleaning instructions printed on the label of your cleaning pad.
Wash care instructions
- Machine wash warm 140°F (60°C) - No bleach - No fabric
softener - Air dry only - Allow to dry fully before re-use.
K
