corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Turn off all controls before unplugging.
WARNING:
:
Do not operate the appliance with systems which have positive ground or a different voltage.
• The cigarette lighter socket may not be live when the ignition is off and/or the key is removed. If in doubt, consult your
vehicle’s owner’s manual for information regarding the above.
• Use only as described in this manual. Use only manufacturer’s recommended attachments.
• Do not use the appliance near water. Do not immerse the appliance in water.
WARNING:
Risk of Fire. Do not replace any vehicle fuse with a rating higher than
recommended by the vehicle manufacturer. This product is rated to draw 10 amperes from a 12V vehicle outlet. Ensure
that the electrical system in your vehicle can supply this product without causing the vehicle fusing to open. This can
be determined by making sure the fuse in the vehicle which protects the outlet is rated higher than 10 amperes.
Information on the vehicle fuse ratings are typically found in the vehicle operator’s manual. If a vehicle fuse opens
repeatedly, do not keep on replacing it. The cause of the overload must be found. On no account should fuses be
patched up with tin foil or wire as this may cause serious damage elsewhere in the electrical circuit or cause fire.
WARNING:
Do not look into the air vents when the unit is switched on, as sometimes there is a
possibility of small debris being discharged from the air vents, especially after cleaning / replacement of the filters as
debris inside the unit can be disturbed.
Symbols
• The label on your tool may include the following symbols. The symbols and their definitions are as follows:
V ..................volts A ...................amperes
Hz ................hertz W ..................watts
min ..............minutes
or AC .......alternating current
or DC ..direct current
no .................no load speed
................Class I Construction
..................earthing terminal
(grounded)
.................safety alert symbol
................Class II Construction
.../min or rpm..revolutions or reciprocation
(double insulated)
per minute
............Read instruction manual before use
..................Use proper respiratory protection
................Use proper eye protection
..................Use proper hearing protection
SAVE THESE INSTRUCTIONS
PRODUCT FEATURES
1. On/off power switch
2. Removable handle
3. Locking ring
4. Hose
5. Door latch
6. Accessory clip
7. 2-in-1 nozzle accessory
8. Crevice tool
9. 12v Vehicle adaptor
ASSEMBLY
MOUNTING ACCESSORIES (FIGURES A - C)
The 2-in-1 nozzle (7) has a brush that can be folded
forward for dusting and upholstery cleaning (
figure A
).
The crevice tool (8) allows for vacuuming in narrow
and hard-to-reach places.
• To attach an accessory, press the accessory clip
(6) and slide the accessory onto the handle (2).
3
9
1
3
5
4
2
7
6
8
A