Black & Decker BDCT108, Оригинальное руководство пользователя

Страница: 5 / 16

-Store idle power tool out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users
-Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools
-Keep cutting tools sharp and clean . Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control
-Use the power tool, accessories and tool bits etc
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
Battery tool use and care
manufacturer. A charger that is suitable for one type
of battery
another battery pack.
battery packs. Use of any other battery packs may create
- When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the
- Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact accidentally
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Service
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained
-Any misuse or failure to follow the instructions for use
renders the guarantee and the manufacturer’s liability null
and void.
Safety warnings for Drills and Screwdriver
- Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
may contact hidden wiring or its own cord. Cutting
accessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the
operator an electric shock.
- Fully
- Do
- Do
consumables
immediatel
- Do not
work.
- Do
correct
tool will
was designed.
- Do
whatsoeve
- Do
- The
below 40ºC.
- Disconnect
in use and before undertaking any cleaning task.
- Remove
going to use it for some time.
- This
to ensure that they do not play with the appliance.
- This
product
unused to its handling.
- This
and/or the disabled.
- Keep
sunlight.
- Let
in a safe
defects
problem
Repair clause.
Description (A, B, C, D, E)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
- Switch off the power tool immediately when the tool
insert jams. Be prepared for high reaction torque that
can cause kickback. The tool insert jams when the power
tool is subject to overload or it becomes wedged in the
workpiece.
- High reaction torque
Protect the battery against heat, e. g., against
Danger of explosion.
- In case of damage and improper use of the battery,
vapours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can
irritate the respiratory system.
Additional safety warnings
- CAUTION: In order to prevent overheating do not cover
the appliance.
- Ensure that neither the air access nor exit become either
totally or partially covered by drapery, clothing, etc., as this
- Do not use the appliance if the cable or plug is damaged.
- Ensure that the voltage indicated on the rating label
matches the mains voltage before plugging in the
appliance.
- If any of the appliance casings breaks, immediately
disconnect the appliance from the mains to prevent the
possibility of an electric shock.
there are visible signs of damage or if it has a leak.
- CAUTION: Maintain the appliance dry.
- Check the state of the power cord. Damaged or tangled
cables increase the risk of electric shock.
- If using the appliance outdoors, use a suitable cord
extension.
- Do not touch the plug with wet hands.
- Use clamps or a vise to secure the object to be worked
in place. The work will be safer if both hands are free to
control the tool.
- Do not touch any of the appliance’s moving parts while
it is operating.
- Protect yourself from contact with and the inhalation of
dust created by sanding wood and metal surfaces and
surfaces coated with lead paint. Use protective equipment
that complies with the appropriate health and safety
regulations.
- When working in amianthus/asbestos and/or silica
stone, the dust produced is extremely harmful to your
health. Wear protection against inhalation of this dust,
in compliance with current regulations on accident
prevention.
- When working take care to avoid electric wires and gas or
water pipes in order to avoid an electric shock.
4