Black & Decker BDCMTTS-XE Скачать руководство пользователя страница 11

Страница: 11 / 12

Technical data

TrimSaw

Weight

729g

MAINTENANCE

Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool;

never immerse any part of the tool into a liquid.

IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and

adjustment (other than those listed in this manual) should be performed by authorized service

centers or other qualified service personnel, always using identical replacement parts.

ACCESSORIES

wARNING:

The use of any accessory not recommended for use with this tool could be hazardous.

Recommended accessories for use with your tool are available from your local dealer or authorized

service center. If you need assistance regarding accessories, please call: 1-800-444-224

no-load speed

TROuBLEShOOTING

Problem

Possible Cause

Possible Solution

• Unit will not start.

• Attachment is not secured.

• Make certain the attachment is fully

pushed into the Power Unit.

0-3400/min RPM

when operate with 18V MATRIX unit

BDCMTTS-XE

ENGLISH

(Original instructions)

Содержание BDCMTTS-XE













Результаты поиска

Содержание BDCMTTS-XE

Отзывы:

Похожие инструкции для BDCMTTS-XE

Бренды по названию

Популярные бренды

Black & Decker BDCMTTS-XE, Руководство пользователя

Результаты поиска

Содержание BDCMTTS-XE

Отзывы:

Похожие инструкции для BDCMTTS-XE

Бренды по названию

Популярные бренды