14 • ENGLISH
While cooling
While warming
ATTACHMENT:
HOT
DC
OFF
COLD
12V
WHEN USING 12V POWER
When car power is used (DC 12V)
CC
Energy saving tips
f
Choose a well ventilated installation location which
is protected against direct sunlight.
f
Allow warm food to cool down first before placing it
in the device to keep cool.
f
Do not open the cooling device more often
than necessary.
f
Do not leave the lid open for longer than necessary.
USE AND CARE
f
Do not modify the cooler/warmer in any way.
Unauthorized modification may impair the function
and/or safety and could affect the life of the
equipment. There are specific applications for which
the cooler/warmer was designed.
f
Always check for damaged or worn out parts before
using the cooler/warmer. Broken parts will affect
the operation. Replace or repair damaged or worn
parts immediately.
f
When the cooler/warmer is not in use, store it in a
secure place out of the reach of children. Inspect it for
good working condition prior to storage and before re-
use.
WARNING AND NOTICE
For correct operation, please read the instructions below
carefully before using the appliance. Misuse of the appliance
could cause injuries and damage to the appliance.
f
Please ensure the 12V plug is disconnected from
the DC socket after the engine is turned off.
f
Please unplug the 12V plug from the DC socket
when the cooler is not in use.
f
Prevent any obstructions to the fan. If the fan
becomes blocked, it can ove rheat and cause fire.
Avoid covering with towels or cloths.
f
Please ensure the sockets of the cords are inserted
firmly. A loose fitting can result in the cord and
sockets over-heating and failing.
f
Keep the appliance away from flammable items and
dampness to prevent any electrical failure and fire.
f
Do not disassemble the appliance.
f
Do not switch the setting from cool to warm immediately.
Change between the settings only after the cooler has
been OFF 30 minutes.
f
Do not rinse your cooler in water.
f
Avoid turning the cooler upside down.
f
Avoid dropping your cooler.
CLEANING AND MAINTENANCE
f
Switch unit off, unplug power cord and allow it to cool
or heat up to room temperature.
f
Wipe the inside with a clean, damp cloth. Use a mild
soap with water if necessary. Do not use abrasive
cleaners, scrubbers or household chemicals as this
may damage the finish.
f
Do not immerse the unit in water.
f
It is recommended that the general condition be
examined before it is used. Keep your cooler
and warmer in good repair by adopting a program
of conscientious repair and maintenance. Have
necessary repairs made by qualified service personnel.
Attachments
DC Power Cord
(Power cord for car)
Connector
12V Power
Cold/Hot
Switch
Car Power
Socket
