10
Battery pack will not
charge.
Charger not plugged in. Plug charger into
a working outlet.
Surrounding air
temperature too hot or
too cold.
Move charger and
battery pack to
a surrounding air
temperature of above
40 degrees F (45 ºC) or
below 105 degrees F
(+40.5 ºC)
Unit shuts off abruptly.
Battery pack has
reached its maximum
thermal limit.
Allow battery pack to
cool down.
Out of charge. (To
maximize the life of
the battery pack it is
designed to shutoff
abruptly when the
charge is depleted
Place on charger and
allow to charge.
Maintenance
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning!
Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
♦
Regularly clean the ventilation slots in your tool and
charger using a soft brush or dry cloth.
♦
Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
♦
Regularly open the chuck and tap it to remove any dust
from the interior.
Protecting the environment
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according to
local provisions.
Further information is available at
www.2helpU.com
Technical data
BDASB18
Voltage
V
DC
18
No-load speed
Min
-1
0 - 360/0 - 1400
Max. torque
Nm
45
Chuck capacity
mm
1-10
Max Drilling capacity
Steel/wood
/
Masonary
mm
10/25/10
Weight
kg
0.9 (with battery 1.3)
Charger
Input voltage
V
AC
230
230
230
Output voltage
V
DC
18
18
18
Current
mA
200
400
1A
Approx. charge time
Hours
8
3 - 5
1.5
Battery
BL1518
Voltage
V
AC
18
Capacity
Ah
1.5
Type
Li-Ion
Level of sound pressure according to EN 62841:
Sound pressure (L
pA
) 87.5 dB(A), uncertainty (K) 5 dB(A)
Sound power (L
WA
) 98.5 dB(A), uncertainty (K) 5 dB(A)
Vibration total values (triax vector sum) according to EN 62841:
Drilling into concrete (a
h, ID
) 14.2 m/s
2
, uncertainty (K) 1.5 m/s
2
Drilling into metal (a
h, D
) 1.1 m/s
2
, uncertainty (K) 1.5 m/s
2
EC declaration of conformity
MACHINERY DIRECTIVE
BDASB18 - Impact drill
Black & Decker declares that these products described
under “technical data” are in compliance with: 2006/42/EC,
EN62841-1:2015 EN62841-2-1:2018+A11:2019.
These products also comply with Directive 2014/30/EU
and 2011/65/EU. For more information, please contact
Black & Decker at the following address or refer to the back
of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
Black & Decker.
Ed Higgins
Director – Consumer Power Tools
Black & Decker Europe, 270 Bath Road, Slough,
Berkshire, SL1 4DX
United Kingdom
29/11/2019
(Original instructions)
ENGLISH
