Maintenance
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool;
never immerse any part of the tool into a liquid.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment should be performed by authorized service centers or other qualified service
organizations, always using identical replacement parts
CARE OF THE TABLE TOP
Protect your investment. Keep your table saw clean. If you notice signs of rust, steel wool the areas,
clean with mineral spirits or denatured alcohol and apply paste wax.
MAINTAINING FENCE SYSTEM
Your fence should always slide freely. If it seems to require excessive force to slide or if it feels
rough, wipe the rails and fence head gliding surface with a cloth or paper towel. Check the
movement again. If it still feels rough, clean the fence head with a mild solvent such as dena-
tured alcohol or mineral spirits. Re-coat the rail with a heavy coat of paste wax or a light oil.
Slide the fence head back and forth several times to coat the rail and fence. Wipe off any
excess wax or oil from the rail. If fence still does not move freely, refer to rip fence adjust-
ment section.
LUBRICATION
First clean off any accumulated sawdust from the gears and the worms with a stiff brush.
Next, remove any pitch or resin which has built up. You may need to use a solvent such as
mineral spirits to remove it. Next, re-apply grease to the gears marked with arrows in Figure
30. You can also apply paste wax to the gears if you find that the grease is attracting too much
sawdust.
NOTE:
Keep all spray lubricants away from upper guard.
Over time, the lubricants used in the mechanism of your table saw may need to be
replenished.
13
ACCESSORIES
Recommended accessories for use with your tool are available from your local dealer or
authorized service center. If you need assistance regarding accessories, please call:
1-800-54-HOW-TO. (800-544-6986).
WARNING: The use of any accessory not recommended for use with this tool could be
hazardous.
SERVICE INFORMATION
Black & Decker offers a full network of company-owned and authorized service locations
throughout North America. All Black & Decker Service Centers are staffed with trained per-
sonnel to provide customers with efficient and reliable power tool service.
Whether you need technical advice, repair, or genuine factory replacement parts, contact the
Black & Decker location nearest you.
To find your local service location, refer to the yellow page directory under “Tools—Electric” or
call: 1-800-54-HOW-TO (800-544-6986).
FULL TWO-YEAR HOME USE WARRANTY
Black & Decker (U.S.) Inc. warrants this product for two years against any defects in materi-
al or workmanship. The defective product will be replaced or repaired at no charge in either
of two ways.
The first, which will result in exchanges only, is to return the product to the retailer from whom
it was purchased (provided that the store is a participating retailer). Returns should be made
within the time period of the retailer’s policy for exchanges (usually 30 to 90 days after the
sale). Proof of purchase may be required. Please check with the retailer for their specific
return policy regarding returns that are beyond the time set for exchanges.
The second option is to take or send the product (prepaid) to a Black & Decker owned or
authorized Service Center for repair or replacement at our option. Proof of purchase may be
required. Black & Decker owned and authorized Service Centers are listed under “Tools-
Electric” in the yellow pages of the phone directory.
This warranty does not apply to accessories. This warranty gives you specific legal rights and
you may have other rights which vary from state to state and province to province. Should you
have any questions, contact the manager of your nearest Black & Decker Service Center. This
product is not intended for commercial use.
30
