12
Combination Blade- For general-purpose ripping and cutting.
Chisel Tooth Combination- Specially designed for general-purpose ripping
and crosscutting.
Framing/Rip Combination- For facing, roofing, siding, sub-flooring,
framing, form cutting.
Cross Cut Blade- For smoother, faster cross cutting.
Ripping Blade- Fast for rip cuts.
Plywood Blade- For smooth cuts in plywood. Reduce splintering.
Planer Blade- For very smooth ripping and cross cutting.
Flooring Blade- For sawing where nails may be occasionally encountered.
Metal Cutting Blade- For cutting aluminum, copper and other soft metals.
Friction Blade-For cutting corrugated, galvanized sheets.
Carbide Tipped Blade- For longest sawing without blade sharpening. Cuts
wood, transite, cemesto board, asbestos, formica, masonite, and similar
materials.
ACCESSORIES
Recommended accessories for use with your tool are available at extra cost
from your distributor or your local service center. A complete listing of
service centers is included with your tool.
CAUTION: The use of any non-recommended accessory may be hazardous.
If you need any assistance in locating any accessory, call 1-800-9-BD TOOL
(1-800-923-8665) or contact Black & Decker, Consumer Services
Department, 626 Hanover Pike, P.O. Box 618, Hampstead, MD 21074.
RIP FENCE: Attaches to top of saw shoe. Permits rip cuts without a penciled
guide line.
SAW PROTRACTOR: Guides saw for accurate cut-off work. Adjusts from
0 to 70 degrees.
154577/2683-220 IC 5/17/02 1:47 PM Page 12
