P a g e
4 | 8
USER MANUAL AI BOX
2.
Mode Button
Mode button is used in this device is tactile switches type, user-developed operating
script.
3.
Reset Button
The reset button is used to factory reset the device.
Reset procedure: Unplug the Box B01 -> Hold down the reset button -> Plug in the
power -> Continue to hold for about 10 seconds and then release it -> Box will perform a
factory reset and boot up at the Google Setup Wizad screen
4.
USB Type C
One port USB Type C 3.1 is available in this device for debug and flashing images.
5.
HDMI
One port HDMI 1.4 Type A is available in this device for transmitting images, videos
to external devices such as monitors.
6.
Alarm I/O (DI/DO terminal)
Various I/O supports including Alarm-in, Alarm-out (Relay).
DI1+
1
st
Alarm input signal line terminal, positive
DI1-
1
st
Alarm input signal line terminal, negative (GND)
DI2+
2
nd
Alarm input signal line terminal, positive
DI2-
2
nd
Alarm input signal line terminal, negative (GND)
DOA
1
st
Alarm output signal line terminal 1
DOB
1
st
Alarm output signal line terminal 2
DOC
2
nd
Alarm output signal line terminal 1
DOD
2
nd
Alarm output signal line terminal 2
Two alarm outputs with NO contacts of IM06GR (TE) relay:
Switching power: 60W/62.5VA
Switching voltage: 220VDC/250VAC
Switching current: 2A
Two alarm inputs can support input voltage level are 5VDC to 12VDC.
