bk ultrasound bk3000, Руководство пользователя

Страница: 12 / 52

bk3000 User Guide (16-01249-EN-01) Safety Information
11
The system also complies with ANSI/AAMI ES60601-1 (2005) and CAN/CSA
C22.2 No.601.1 (2008).
It fulfills the requirements for dust protection (IP20) for ordinary equipment
specified in EN 60529.
Physicians
only
Caution Rx-c1
Federal law in North America restricts this device to sale to, or on the order of, a
physician.
Proper
Training
WARNING GS-w1
Before you attempt to use BK Medical equipment, you should be trained in
ultrasonography or be under the supervision of someone who is trained in
ultrasonography. You should also be thoroughly familiar with the safe operation of your
ultrasound system: read all the user documentation that accompanies it.
No further training is required, but BK Medical offers training in how to use the system.
Consult your BK Medical representative for information.
Equipment
failure
WARNING GS-w2
If at any time the system malfunctions, or the image is severely distorted or degraded, or
you suspect in any way that the system is not functioning correctly:
•
Remove all transducers from contact with the patient.
•
Turn off the system. Unplug the system from the power source.
•
Do not try to repair the system yourself.
•
Contact your BK Medical representative or hospital technician.
Isolating the
system
WARNING GS-w3
The power supply cord connects the equipment to the line voltage. To isolate the
equipment, you must unplug the power supply cord from the power source. Do this
before you try to make any repairs to the system.
Spilled
liquids
Caution S-c2
Do not spill liquids on the equipment.
Conden-
sation
Caution S-c3
Large variations in temperature or humidity may cause water to condense inside the
system. If this happens, the system may fail to operate properly. Always let the system
come to room temperature before you plug it in.
•
Wait at least 2 hours after the system has been subjected to major changes in
temperature or humidity.
•
If there is visible evidence of condensation, wait at least 8 hours.