BK Radio GMH Plus Скачать руководство пользователя страница 22

Страница: 22 / 26

GMH Plus Owner’s Manual

button to disable receive Channel Guard (an arrow will appear over the

button). The transmitter is locked out only if the

[CG]

button is off (no

arrow above the

[CG]

button).

ALPHANUMERIC DISPLAY

The Alphanumeric Display can be programmed to operate in Numeric

Mode, displaying channel numbers instead of labels.

Display enunciators indicate the following information:

ALPHANUMERIC INDICATION

-Priority Channel

PRG

-Programming Mode

-Transmit

-Receive

SCN

-Scan List Channel
-Flashing SCN indicates scanning

in progress, and RX SCN indicates

receiving on a scanned channel.

-User Channel Guard Active

GRP

-Group Label

GMH Series mobile radio displays can be programmed with the following

features:

CHANNEL LABELS

You can program the radio with a label for each of the 25 channel groups

and a label for each of the 16 channels within each group.

To display the channel number associated with a channel label:

Press the microphone’s

[#]

key to display the group number.

Press the

[#]

key again to display the channel number.

Press and hold the

[#]

key to display the channel label.

Press the

[ENT]

key or wait for about 5 seconds to revert to

normal radio operation.

Each label can include up to eight characters, with decimal points

available between characters. Characters can include A-Z, 0-9, -, *, $, /,

+, %, \, |, _, <, >, h, or a blank space.

Содержание GMH Plus



























Результаты поиска

Содержание GMH Plus

Отзывы:

Похожие инструкции для GMH Plus

Бренды по названию

Популярные бренды

BK Radio GMH Plus, Руководство пользователя

Результаты поиска

Содержание GMH Plus

Отзывы:

Похожие инструкции для GMH Plus

Бренды по названию

Популярные бренды