BK Radio DPH- CMD, Руководство пользователя

Страница: 15 / 23

16 BK Radio
CHANNEL GROUPS
Channels are arranged in 25 groups of up to 20 channels.
SELECT A GROUP/CHANNEL
The rotary knob selects channels in the group
selected by the keypad:
1. Press the [#] key on the keypad to display
the current group number.
2. Press number keys for the new group
number, or press [#] again to select the
Command Group.
When changing groups, invalid entries will
not be accepted, and the radio remains in
the previously selected group.
3. Press the [ENT] key or wait 5 seconds.
The radio returns to normal operation for
the new group, and the selected channel
is displayed. All selected scanning
functions affect only the channels in the
group you are operating in.
PROGRAMMABLE TOP SWITCHES/
FUNCTION MENU
The following functions can be assigned to the
three top switches or the keypad
[FCN] key
menu:
FUNCTION FCN Key Menu Label
Low Power Select TX LOW POWER
Channel Scan CHANNEL SCAN
Priority Scan PRI SCAN
Repeater Talk Around TALK-AROUND
Group Scan GROUP SCAN
Transmit Digital TX DIGITAL
HI/LO
Scan
Priority
Scan
1 2 3
4 5 6
7 8 9
0
* #
CLR
FCN
PRI
ENT
DPH-CMD Owner’s Manual 29
On channels programmed for analog
transmissions, pressing PTT in Emergency
Mode will result in a normal analog transmission.
On channels programmed for Mixed Mode
transmissions, pressing PTT will result in a
digital transmission, regardless of the position of
the ‘TX Digital’ switch.
When receiving a qualified emergency call, the
radio will beep. The 1
st
line of the display will
alternately flash the word ‘EMERGENCY RX’
and then the active channel’s label for the
duration of the reception, and during any hold
time. If the radio is configured to show the
caller’s TGID or Unit ID
1
on the 2
nd
line, that
information will be displayed along with the
emergency message, but it will not flash. The
RX and D icons will also be lit.
USER TRANSMIT CHANNEL GUARD
When the radio is being programmed with transmit and receive
frequencies for each channel, a receive Channel Guard value and a
transmit Channel Guard value can also be assigned to each channel.
On channels that do not have a default transmit Channel Guard
programmed, the user can choose CxCSSs from a global UTXG Pick
List containing 32 entries. To assign a UTXG for use on a channel, all
scanning functions (Channel Scan, Group Scan, and Priority Scan)
must be turned OFF.
The user selects a channel, then presses and
holds the “T” key (8 key) until “T—“ appears on
the 2
nd
line of the display. The keypad can
then be used to enter a number from 1 to 32.
When a UTXG is active, the second line of the
display will show the number of the selected
list entry (TXX). Once a UTXG is assigned to
a particular channel, it will be stored and used
with that channel whenever the channel is
selected. Repeater Talk Around operation will
use the pre-programmed RX CxCSS.
1
If the Source ID is on the caller ID list, the alias will be displayed
.
LABEL 20
T8
EMERGENCY RX
Sid 123