BK Precision 1794, Инструкция по эксплуатации

Страница: 11 / 42

OPERATORS SAFETY SUMMARY
The general safety information in this part of the summary is for both operating &
servicing personnel. Specific warnings and cautions will be found throughout the
manual where they apply, but may not appear in this summary.
TERMS IN THIS MANUAL :
CAUTION : Statements identify conditions or practices that could result in
damage to the equipment or other property.
WARNING : Statements identify conditions or practices that could result in
personal injury or loss of life.
TERMS AS MARKED ON EQUIPMENT :
CAUTION : Indicates a personal injury hazards not immediately accessible
as one reads the markings,or a hazard to property, including the
equipment itself.
DANGER : Indicates a personal injury hazard immediately accessible as one
reads the marking.
POWER SOURCE : This product is intended to operate from a power source that
does not apply more than 130V rms between the suply conductors or between
either supply conductor and ground. If the Internal Tap is selected for 230V AC
operation, then the input voltage should not be more than 250V rms. A protec-
tive ground connections by way of the grounding conductor in the power cord is
essential for safe operation.
GROUNDING THE PRODUCT : This product is grounded through the
grounding conductor of the power cord. To avoid electrical shock, plug the
power cord into a properly wired receptacle before connecting to the product
input or output terminals. A protective ground connection by way of the
grounding conductor in the power cord is essential for safe operation.
DANGER ARISING FROM LOSS OF GROUND : Upon loss of the protective
ground connection, all accessible conductive parts (including knobs and controls
that may appear to be insulating) can render an electric shock.
USE THE PROPER POWER CORD :
Use only the power cord and connector specified for your product.
Use only a power cord that is in good condition.
Refer cord and connector changes to qualified service personnel.
8