BK Medical bkSpecto Скачать руководство пользователя страница 78

Страница: 78 / 164

Chapter 7

August 2018

bkSpecto Advanced User Guide

(16-01642-01)

Figure 7-12. The Doppler indicator (line and gate) superimposed on a B-mode image.

Fig 7-13 shows information available in Doppler indicators.

Figure 7-13. Doppler indicators (three examples).

Fig 7-13 (a)

The dotted line represents the Doppler line. The lines at right angles to

that show the Doppler gate.

Fig 7-13 (b)

A diagonal line (relative to the Doppler line) indicates a sample volume

with angle correction.

Fig 7-13 (c)

The horizontal dotted lines show the false sample volume in HPRF (see

page 79).

To turn off Doppler mode:

•

Tap

Adjusting the Doppler Mode Image

Doppler Indicator

When Doppler mode imaging is turned on, the Doppler indicator is superimposed on
the B-mode image.

You can adjust the position and size of the Doppler gate to get information from
sample volumes in various parts of the B-mode image. The image must not be frozen
when you do this.

Doppler line

Doppler gate

(sample volume)

angle correction line

false sample volume

Содержание bkSpecto





































































































































































Результаты поиска

Содержание bkSpecto

Отзывы:

BK Medical bkSpecto, Руководство для продвинутых пользователей, Страница: 78 / 164

Результаты поиска

Содержание bkSpecto

Отзывы: