BJLive BJ-EX5 MyRoom! Centre, Инструкция по сборке

Страница: 9 / 17

BJ-EX5 MyRoom! Centre
Page 9
Make sure that you’re choosing the screen connected via VGA and that the multiple
displays are extended.
3. Two screens in the same device: This is the case of using a TV or beamer with
multiple inputs. In this case, the HDMI cable from MyRoom! Centre and the VGA
cable will be connected to the corresponding TV or beamer inputs.
The control screen and the display of the results will be in the same device but in
different “channels”. To access the activities panel, choose to display the VGA
channel from the TV source options. To watch the result, choose to display the
HDMI channel.
As in case 2, with this configuration is necessary to extend the multiple screens and
set as main screen the one connected via VGA.
Configurations 2 and 3 can be set up in a way that the control screen is displayed on a
tablet. In this case it will be necessary to connect the access point to the PC using a
standard Ethernet cable, and configure a WiFi connection. It is possible to use any
Android or iOS tablet with a Splashtop program installed. See section 5 of this manual
to learn how to display the control screen in a tablet.