BJ Take Inc
220 Ramsey Drive Dunnville, ON N1A 0A7
2
of
3
Figure 3.
Figure. 4
Surface Mounting
Step 1:
Carefully remove the luminaire and surface mount kit
from the packaging and inspect for defects before
installing.
Step 2:
Install three sides of the surface mount kit centered over
a junction box using the mounting holes. (
See Figure 3)
Step 3:
Slide the fixture part way into the surface mount kit.
(See
Figure 4)
Step 4:
Wiring
Remove the access panel and remove a knockout for AC
line input. Install listed electrical fittings in the knockout
hole and connect the wiring.
(See Figure 2)
Note:
For wiring instructions please see
Electrical
Connections
on page 3.
Step 4:
Slide the fixture the rest of the way into the surface mount
kit and install the last piece of the surface mount kit.
