BJ Take Inc
220 Ramsey Drive Dunnville, ON N1A 0A7
1
of
3
BLRT
Series
LED Recessed Luminaire
Important Safeguards:
When using electrical equipment, basic safety
precautions should always be followed including the
following:
Read and follow all safety instructions
1.
Danger
- Risk of shock - Disconnect power
before installation
2.
Product must be installed in accordance with
CEC or your local electrical code
. If you are
not familiar with these codes and requirements,
consult a qualified electrician.
SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE
Notes:
•
Available luminaire lengths are 2x2, 2x4, 1x4,
and 20x60.
Installation Instructions:
Figure 1.
Figure 2.
Luminaire Installation:
Recessed Mounting
Step 1:
Carefully remove the luminaire from the packaging and
inspect for defects before installing.
Step 2:
Orient the luminaire securely in the T-bar ceiling grid.
(
See Figure 1)
Step 3:
Mounting & Wiring
If needed use the four S-hook mounting holes on the
fixture for added security. Remove the access panel and
remove a knockout for AC line input. Install listed
electrical fittings in the knockout hole and connect the
wiring.
(See Figure 2)
Note:
For wiring instructions please see
Electrical
Connections
on page 2.
Step 4:
Reattach the access panel.
