SHX Stars
Page 3
3.
Before you start: conditions for correct operation
-
SHX stars should be used where there is a power socket.
-
The projector can be wall mounted. Wall attachments are not included.
4.
Using the product
-
SHX stars are pre-set to interact with the SHX room. (The original
product manual is also enclosed)
-
It is only necessary to connect the power supply and this in turn to the
BJ-234 Enabler
-
The projector is switched on and off from the Control SHX software and
via the various control elements.
-
The Star projector has an adaptation that blocks the ON/OFF button to
allow it to be switched on with the SHX System via the
5.
Maintenance and cleaning
-
Clean the surface of the SHX Projector regularly to ensure the correct
performance of the device.
-
It must be disconnected from the power supply before cleaning.
-
Clean using soapy water and a soft cloth (wrung out).
-
Never use chemical or abrasive products for cleaning.
-
Thoroughly dry the surface and wait one hour to connect to the power
supply.
6.
Additional information
If the configuration is lost:
-
See enclosed product manual
-
The configuration of the for use with the BJ SHX control
software must be as follows: