BJ Live BJ CONTROL PRO, Руководство пользователя

Страница: 8 / 24

BJ-256 BJ Control Pro
User Guide
BJ-256 BJ Control Pro
Page 8
How a key is selected and the speed of scanning are parameters that can be
configured to suit user requirements. In this configuration, the user can use the
switch to access each of the cells on the remote and enable them.
NOTE:
Sometimes, when the switch is connected, the LEDs of the different keys
may automatically turn red in sequence. This indication of the enabled status of the
different cells is known as
scanning .
2 Changing levels
A level is a set of programmable cells on the remote. To increase the number of
devices controlled, you can change the level on the remote. When the remote
changes level, the functions programmed in the cells are stored but are no longer
active. This way, you can programme the 14 cells again to control 14 new devices.
For example, you can programme cell 3 to set off an alarm in level 1 and to turn on
the television in level 2.
The remote has eight levels and up to 112 programmable functions (14 cells in
each level).
To change the level , activate the key that was programmed to change levels. By
default, this is the last key (key 15), which is represented on the programming
template with the symbol "S" or "ESC". You can also change levels using any other
key in which the code 300 has been recorded.
The number of levels set by default is 4. Follow instructions of section 7 to increase
the number of levels.
The current level of the remote is indicated by the level LEDs:
Level Level LEDs
1
2
3
4
5
6
7
8
Any time you wish to change levels, you will need to activate the level change key
and cycle through the levels. After level 8, you will be taken back to level 1.