BIXOLON XT2-40 Series, Руководство пользователя, Страница: 13 / 57

Ver. 1.00 - 13 -
XT2-40 Series
2-2-2-5 Printer Operation Button
List Explanation
FEED
Turn on the printer and press the FEED button.
When you press the FEED button, the printer will advance media until
the FEED button is released.
If you are using continuous labels, pressing the FEED button will
advance a length of media until the button is released.
If you are using media with gaps, pressing the FEED button once will
advance only one label.
If the label does not stop at the correct position, you need to run the
auto-detection function for your media,
please see Section 4-7 Label size calibration and Self-Test.
Pause printing_FEED
Pressing the FEED button while the printer is in standby mode will set
the printer to pause mode. In this mode,
the printer can receive commands, but it will only process them when
it is reset to standby mode. Pressing the
FEED button again will reset the printer to standby mode.
Pressing the FEED button during printing will interrupt printing. When
the FEED button is pressed again, the printer
resumes printing. Example: While a 10-label print job is running, you
press the FEED button to pause the printer.
Two of the labels have been printed. To resume printing and print the
remaining eight labels, you will need to press
the FEED button again.
Cancel printing_FEED
Press and hold the FEED button for 3 seconds during printing cancels
a print job. The current print job is cancelled.
Example: While a 10-label print job is running, you press the FEED
button. Two of the labels have been printed.
The print job is cancelled and the remaining eight labels will not be
printed
Used for menu selection
On the Menu page and the Value Settings page, used for selecting a
menu or setting a value.
POWER Button
Press the POWER button to turn on the printer, and the start up
screen appears. The printer is on “ready to print”
status. When printer is turned on, hold and press down the POWER
button for 3 second will turn the printer off.