Ver. 1.00
- 21 -
XM7-30 Series
2-2-3-2 Charging Battery
1) Insert the battery into the Quad charger
as shown in the figure on the left.
2) Gently slide the battery until it reaches
the bottom of the charger.
3) Charging starts as soon as the battery is
completely inserted.
4) After charging, remove the battery from
the Quad charger.
LED
Charge Status
Charge Time
Red LED On
Charging
Within 4 hours
Green LED Blinking
Over 80% Charged
Green LED On
Fully Charged
Red LED Blinking
Error Replace
or Reinstall Battery
• If the red lamp of the charger blinks, install the battery again.
• If the red lamp continues to blink despite several attempts (4 ~ 5 times)
to install the battery, contact your local dealer.
• The charging time may vary depending on the type of the charger or
ambient temperature.
