Rev. 1.00
- 12 -
STP-103
ESC d n
[Name] Print and feed paper n lines
[Format] ASCII ESC D n
Hex 1B 64 n
Decimal 27 100 n
[Range] 0
≤
n
≤
255
[Description] Prints the data in the print buffer and feeds the paper n line.
●
This command sets the print starting position to the beginning of the line.
●
This command does cot affect the line spacing set by ESC 2 or ESC 3.
●
The maximum paper feed amount is 40 inches. Even if a paper feed
amount of more than 40 inches is set, the printer feeds the paper only
40 inches.
●
When label mode is selected and a paper feed amount that exceeds the
length of one label is set, the printer feeds the label paper to the next print
starting position.
ESC t n
[Name] Select character code table.
[Format] ASCII ESC t n
Hex 1B 74 n
Decimal 27 116 n
[Range] 0
≤
n
≤
5, n = 11, 255
[Description] Selects a page n from the character code table.
n
Pages
0
0 : PC437 [U.S.A., standard Europe]
1
1 : Katakana
2
2 : PC850 [Multilingual]
3
3 : PC860 [Portuguese]
4
4 : PC863 [Canadian-French]
5
5 : PC865 [Nordic]
11
11 : PC858 [Euro]
255 Space
page
[Default] n = 0
ESC { n
[Name] Turns upside-down printing mode on/off
[Format] ASCII ESC { n
Hex 1B 7B n
Decimal 27 123 n
[Range] 0
≤
n
≤
255
[Description] Turns upside-down printing mode on or off.
●
When the LSB of n is 0, upside-down printing mode is turned off.
●
When the LSB of n is 1, upside-down printing mode is turned on.
