Ver. 1.00
-
22
-
SRP-S3000
1-10 Mounting Partition(40,58mm)
•
Install the Partition in the direction of the arrow as shown below.
The Partition shape is the same and is used separately for each paper size (40,58mm).
The position to secure the partition varies depending on the type of paper.
(Refer to the picture below.)
1. 58mm (2”) roll paper: mount 1 partition at Position #1.
2. 40mm roll paper: mount 2 partitions at Positions #1 and #2.
※
The shape of the partition is the same for each type of roll paper.
Caution
After using narrower papers (e.g. 40, 58 width) than the maximum
paper width of 80mm, please do not use any wider ones as it might
affect printing quality due to uneven platen roller abrasion.
Position #2
Position #1
