background image

 Safety Precautions 

 

In  using  the  present  appliance,  please  keep  the  following  safety  regulations  in  order  to 
prevent any hazard or material damage. 

 
 

 

WARNING 

 

Violating following instructions can cause serious injury or death. 

 

 

 

 

 

 

 

 

 

 

Do not bend the cable by force or leave it under any 
heavy object.

 

 

A damaged cable can cause a fire.

 

 

 
 

   

 

Do not plug in or unplug with your hands wet. 

  You can be electrocuted.

 

 

               

 

Keep the plastic bag out of children’s reach. 

  If not, a child may put the bag on his head. 

 
 

             

 

Do not pull the cable to unplug. 

  This can damage the cable, which is the origin of a fire or a 

breakdown of the printer. 

 

           

 

You must use only the supplied adapter. 

  It is dangerous to use other adapters. 

 

               

 

Do not plug several products in one multi-outlet. 

 

This can provoke over-heating and a fire. 

 

If the plug is wet or dirty, dry or wipe it before usage. 

 

If the plug does not fit perfectly with the outlet, do not plug in. 

  Be sure to use only standardized multi-outlets. 

 

       

 

PROHIBITED 

PROHIBITED 

PROHIBITED 

PROHIBITED 

PROHIBITED 

ONLY SUPPLIED ADAPTER 

PROHIBITED 

V10 CONSUMIBLES S.L.  

Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309

Содержание SRP-S300


































Отзывы: