BIXOLON SRP-383, Руководство по подключению к сети

Страница: 21 / 25

Ver. 1.00 - 21 -
SRP-383
6. Factory Reset
This function changes the LAN settings of the printer to the initial factory settings.
6-1 Initializing LAN Setting
With the printer turned off, press the function key button and turn the printer on. After
pressing and holding the function key button for about 5 seconds, release it. The factory
reset occurs. Regardless of the current setting, DHCP mode is enabled.
[Note]
- Dynamic IP network environment
IP address is assigned to the printer and it can connect to web-server using the
assigned IP address.
Newly assigned IP address can be checked with the Function key.
- Fixed IP network environment
IP address is not automatically assigned to the printer.
Wait for 30 seconds and check whether IP address is assigned to the printer by
pressing the Function key. If IP address is 0.0.0.0, it means that IP address has
not been assigned. In this case, disable DHCP mode using the Configure Tool.
Function Key