Rev. 1.00
- 13 -
SPP-R210
3-2-2 Using Single Battery Cradle (Optional)
1) Connect the power cord
②
to the battery
charger
①
.
2) Connect the battery charger
①
to the
power connector of the single battery
cradle
③
.
3) Plug the power cord
②
into an electrical
outlet.
4) Insert the battery
④
into the single
battery cradle
③
until snaps in place.
3-2-3 Using Vehicle Charger (Optional)
1) Turn off the power to the printer.
2) Connect the vehicle charger
①
to your
car’s cigarette lighter jack.
3) Open the external interface protection
cap in the direction of
②
.
4) Connect the vehicle charger to the power
connector.
CAUTION
The printer may be seriously damaged if a
battery charger not provided by BIXOLON is
used. BIXOLON is not liable for such damage.
WARNING
Turn off the power before charging the battery
for the printer.
①
②
①
②
③
④
①
③
