BIXOLON SMP6210, Руководство пользователя

Страница: 52 / 68

Rev. 1.01
- 52 -
SMP6210
11. Designing Thermal Paper Feed Holder
- Design the paper feed hold so that the feeding load of the paper becomes lower than
0.98N (100gf). Design additional devices to meet the requirements of paper load. Feed
load bigger than 0.98N may cause a printing defect or paper feed failure. Conduct
sufficient verification by actually using the device.
- Follow the following recommendations when designing the position of the paper holder.
When roll paper is used, design the center axis of the roll paper to be parallel with the
printer mechanism so that the paper is not shifted to the side axis during printing.
Conduct sufficient verification by actually using the device.
- Refer to Fig. 11-1 for designing the width of the paper guide device.
Fig 11-1 Dimension of width and position of the paper guide device
※
If the width of the paper guide device is designed to be narrower than required, it may
cause problems in paper feeding.
- When back feeding is necessary, conduct sufficient verification that it does not cause
paper jamming during printing and determine the amount of back feeding.
※
Try to avoid using back feeding as it is susceptible to paper jam.