RFID Programming Manual
Ver.01.10
- 27 -
7. RFID Programming Samples
7-1 RFID Setting
1) Insert the RFID label and turn on the printer power.
2)
Use the
“>RFS” Command
to set the RFID transponder type, transponder read/write
position, error handling, and sending/receiving power.
Ex) >RFS, 5, 3, 2, 15
3) Execute Command(
“>RFCP”) or Pause button to calculate the optimal RFID
transponder coding position (read/write position of the transponder).
- Use Command
(1) Insert the RFID label into the printer and turn on the printer power.
(2) Do Media Calibration and then recognize the RFID Label(Tag).
(3) Send the
“>RFCP” command to the printer.
(4
) When the printer receives the “>RFCP” command, the optimal coding position is
automatically calculated and subsequently saved on the printer. The saved value
remains even when the printer is turned off, and is permanently stored.
♣ Must be executed when modifying the RFID label or using it
for the first time.
