BIXOLON BK3-21, Руководство пользователя

Страница: 30 / 34

Ver. 1.00 - 30 -
BK3-21
Caution
Printing speed may become slightly slower depending on
the data transmission speed and the combination of commands.
Warning
If you do not use an SMPS that meets the above ratings, problems may
occur with the product and quality, and we are not responsible for any
problems that occur.
2) Paper Specifications
1. Roll Core Inside Diameter (mm)
Φ1
1
+3,-0
2. Roll Core Outside Diameter(mm)
Φ1
8 (Min)
3. Outer Diameter (mm)
Φ120 (
Max)
4. Width (mm) 60
+0,-1
/ 58
+0,-1
/ 20
+0,-1
5. Thickness (mm) 0.05 ~ 0.12
Recommended Papers
- TF50KS-
E (Paper Thickness: 65μm): Nippon Paper Industries Co., Ltd.
-
PD 150R (Paper Thickness: 75μm): New Oji Paper Mfg, Co., Ltd.
-
PD 160R (Paper Thickness: 75μm): New Oji
Paper Mfg, Co., Ltd.
-
P350 (Paper Thickness: 62μm): Kansaki Specialty Paper, Inc. (USA)
-
P220AG (Paper Thickness: 65μm): Mitsubishi Paper Mills Limited
-
P220A (Paper Thickness: 65μm): Mitsubishi Paper Mills Limited
-
F5041 (Paper Thickness: 65μm): Mitsubishi HitecPaper Flensburg Gmbh
-
P5047 (Paper Thickness: 60μm): Mitsubishi Paper Mills Limited
Caution
- Use of papers other than those recommended above may damage
TPH or degrade the printing quality and our company is not
responsible for the damage caused by non-recommended papers.
- If you have to use other products, we recommend that you use
papers with a similar level of quality to the recommended ones.
- If a sticking phenomenon (a phenomenon where feeding
with TPH and paper does not occur) occurs due to the
characteristics of the paper, be sure to adjust the printing
density and speed.