Add: Unit 704, No. A3 Building, Tel.: +86-592
‐
6211770
3
rd
Software Park, Xiamen, China Fax: +86-592
‐
6211727
33
Target:
Specify the priority.
Source Host:
To match the source IP of data packets.
Destination Host:
To match the destination IP of data packets.
Protocol:
To match the protocol of data packets.
Ports:
If it is TCP/UDP, then the port can be matched.
If above-mentioned are configured, and router will auto implement the related priority
level.
3.4.4 Static Routing
Static routing is used to add a routing table entry.
Interface:
To choose which interface you want to add routing.
Target:
Can be a host IP, or subnet.
IPv4 Netmask:
The netmask of subnet, if the target is host, the netmask shall be
255.255.255.255.
IPv4 Gateway:
The address of next-hop gateway address.
Note: this address shall be achievable, or you’ll fail to add static routing.
