Bivocom TG462 Series, Руководство пользователя

Страница: 9 / 43

2.2.1 SIM/UIM Card
TG462
supports normal SIM/UIM only, so if you’re using a Micro SIM or Nano SIM card,
you may need to use a Micro SIM or Nano SIM to Normal SIM adapter.
Make sure your router is powered off, then use a needle object(such as a pen) to push the
button near the SIM/UIM card holder, it will flick out immediately. Put the SIM/UIM card to
card holder with chipset upside, insert it to
router and make sure it’s tightly matched.
Warning: Never install SIM/UIM card when router is powered on.
2.2.2 Interfaces connection
TG462 support a RS232 (com1) serial port as console port, which can be used for firmware
upgrade, system log checking, debug, etc.
TG462 include 3 RS232 (com1, com2, com3), and 3 RS485 (com4, com5, com6, while
com4 can be used as RS232 as well.), 1x I2C, 1x TTL, 4x DI, 8x ADC (12 bit AD, support
4~20mA current or 0-5V voltage signal input), 4x Relay, 5x power supply.
TG462 designed with industrial terminal block interface, and the cable in this package with
ends of female connector and stripping cable, the signal of console cable is defined as
below,
RS232 Cable(with DB9 female connector and stripping cable)
Color of cable Corresponding DB9-Female Pin No. Corresponding Pin No. of Router
(Pin 1 closes to power jack, Pin 5