_________________________________________________ NEO 62 SERIES
Button) to dial the last number dialed
•
Default mode: After on-‐hook, the last dialed number will disappear automatically within five minutes.
Setting the Redial to disappear:
•
Press HOLD +*+HOLD+REDIAL/PG
Setting the Redial NOT to disappear:
•
Press HOLD +#+ HOLD+ REDIAL/PG
Base calls handset:
•
On hook, press REDIAL on the base, the handset will ring twice.
9. Adjust Ringer Volume
In On-‐hook status, press VOL+/VOL – to adjust the ringer volume.
Note: Pressing VOL won’t adjust the volume if the reception is set to auto recover.
10. Memory Keys
Method to store the memory keys of the base:
•
On-‐hook mode, press HOLD (for one-‐line hold indicator will turn and for two-‐line CONF indicator will turn on) + Desired
number (twenty-‐four number at most) + MEMORY key/ MWL key.
Method to store the memory keys of the handset:
•
When the base is on-‐hook, press the base’s HOLD +*+HOLD +1,2 or 3 stands for the speed dial keys of the cordless handset,
the memory key that corresponds to handset autodial key.
Note: The three-‐speed dial key’s programming information should be the same as three of the eleven memory keys of the base.
So please make sure that you program and press the relevant key of the base.
The use of the memory keys of the base:
•
The handset is off-‐hook status, press the memory key of the base, the number will be dialed out. The base is in off-‐hook
status, just need to directly press the certain memory key.
The use of the memory keys of the handset:
•
Pressing the ON key or SPKR key, press the relevant memory key, the stored phone numbers will be dialed.
11. Message Waiting Light
When there is a new message, the MWL will flash, press Speaker or pick up the handset, then press MESSAGES key to retrieve
the messages.
12. Register and delete the Handset
For the model without corded handset
First please connect the outside power and correctly install the battery into the handset, then correctly put the handset into the
base. Please put the handset back to the base when the base is on-‐hook status. The charging indicator should be on, and then
off, then on, The MWL indicator of the handset should flash once. Then after 5-‐10 seconds, please press REDIAL on the base, if
the handset rings, it means the registration succeeded.
CHARGING FEATURE
– Available option
Two USB Charging Connectors, which can be used to charge for most mobile devices through USB Charging Cable.
•
IPod USB Connector (Marked 4)-‐-‐-‐Charging for Apple Devices
•
USB CHARGE (Marked 5)—Charging for mobile devices.
4
5
