3.2 On-hook
a. For one
-
line phone, put the handset back to the base or press
OFF of the handset can finish the call. For base, it needs press
SPKR button.
b. For two-line phone, put the handset back to the base or
press the relevant LINE button can finish the call. For the
base, it needs press the relevant LINE button.
3.3. Answer new call
a. For one-line phone, pick up the handset or press the
SPKR to answer the call; for two-line phones, pick up
the handset or press the SPKR or the relevant LINE
button.
b. For two-line model when there is a new call coming, just
press the relevant LINE of Handset or Base to answer
it.( When the base/handset is in use, the previous call
will auto hang up if you press the relevant button of the
base/handset. When the base/handset in us use, the
previous call be held if you press the relevant button of
the handset/base.)
Note: For two-line phone, the base or the handset can work
at the same time if they are using different line in different
base or handset.
3.4. Adjust the call volume
a. When Base is in use, press VOL key to adjust the
receiving volume level of speaker, total four levels.
b. When Handset is in use, press VOL or VOL+/- to adjust
the receiving volume of Handset, total 4 levels.
Note: Press HOLD+#+HOLD+VOL+/VOL- to recover the
default volume level.Press HOLD+*+HOLD+VOL+/VOL-
not to recover the default volume level.
3.5 Using the hold key
a. For one-line phone, when the base is in use, press
HOLD button, the HOLD indicator will flash, IN
USE/SPKRindicator will turn off. In this case, the line will
be held.
b. For two-line phone, when the base is in use, press HOLD
button, the relevant LINE button will flash, the IN
USE/SPKR will turn off. In this case, the relevant line will
be held.
c. For one-line phone, when the handset is in use, press
HOLD button of the handset, the IN USE/SPKR indicator
of the base and the ON indicator will turn off. In this case,
the line will be held.
d. For two-line phone, when the handset is in use, press
HOLD button of the handset, the relevant LINE indicator
will flash, IN USE/SPKR indicator will turn off. In this
case, the line will be held.
e. For one-line phone, re-press HOLD, then press SPKR of
the base of the ON/SPKR button of the handset, the held
line will be released.
For two-line phone, re-press the relevant held Line button
of the base or the handset, the held line will be released. (If
both lines are held, then please press the SPKR button of
the base or handset to release LINE 1)
f.
3.6 SPKR, handset and Wireless Base, Handset
calling changeable
a. The communication can be changed between speaker
status and non-speaker status of the handset through
the SPKR button on the handset
a. The communication can be changed between speaker
status and non-speaker status of the handset through the
SPKR button on the handset
b. Change the communication from base to handset: When
the base is in use, press HOLD button to held the current
line, then press ON or SPKR button of the handset ( for
one-line) or press the relevant held LINE( for two-line),
then the communication will be changed to the handset,
and the base will be released; when the base is in use,
directly press the ON or SPKR button of the handset ( for
one-line) or press the relevant held LINE button (for two-
line), the communication will be changed to handset.
Then please SPKR (for one-line) or relevant LINE (for
two-line) to end the communication through the base.
c. Change the communication from handset to base; when
the handset is in use, press HOLD button to hold the call,
then press SPKR of the base (for one-line) or the relevant
held line( for two-line), the communication will be changed
to base, the held line of the handset will be released;
when the handset is in use, then press SPKR of the base
(for one-line) or the relevant held line( for two-line), the
communication will be changed to handset, then please
put the handset back to the base or directly press the
OFF button of the handset (for one-line) or the relevant
held line (for two-line) to end the communication of the
handset.
3.7 Three-way conference
（
Two-line model
only
）
a. Base three-way conference:
Press the accordance line key to connect the call firstly,
then press HOLD key to hold the current line then
connect another line, after that press CONF key enter into
three way conference mode. Press SPKR key to finish
the CONF mode.
b. Handset three-way conference:
Press the accordance line key to connect the call firstly,
then press HOLD key to hold the current line then
connect another line, after that press CONF key enter into
three way conference mode. Press accordance line key
to finish the CONF mode and keep the current line call, or
press HOLD key to hold the two lines, then press one line
key to continue the call.
c. Press the accordance LINE key to remove the CONF
mode and enter into the accordance line key talking then
press HOLD key to hold the two lines ,then press the
accordance LINE key to talk with the LINE and hold the
nother LINE.
3.8 To redial the last number dialed
a. Base and Handset off-hook, press REDIAL key( for base
and one-line, it’s REDIAL button, for two-line it’s CONF/R
button) to dial the last number dialed
b. Default mode: After on-hook, the last dialed number will
disappear automatically within five minutes.
c. Setting the Redial to disappear:
Press HOLD+* + HOLD+REDIAL/PG
d. Setting the Redial NOT to disappear:
Press HOLD+#+ HOLD+REDIAL/PG
e. Base calls handset: on-hook, press the REDIAL of the
base, the handset will ring twice.
---- Page 3----