Bittel HCD9888(38)TSD, Руководство пользователя, Страница: 9 / 12

BITTEL 38TSD-CID 9
2.10
2.10
2.10 2.10 HOLD/ARD
HOLD/ARD
HOLD/ARD HOLD/ARD Key
Key
Key Key
2.10.1 Off-hook mode, press HOLD/ARD can close sending.
Off-hook mode, press HOLD/ARD enter into Hold mode and put handset back.
1) Pick up handset again to release hold mode and enter into handset calling
mode.
2) Or press HOLD/ARD key again enter into speaker calling mode.
3) Press SPKR key to release hold and enter into speaker calling mode.
4) Paralleled phone set off-hook to release hold mode and the other phone set
realize on-hook mode.
2.10.2 If meet it’s busy after off hook and dial the phone number, resume handset,
press ARD key into the automatic redial mode. It’s ringing back means the phone
call connected, pick up handset or press SPKR to make the call. It will shut off
automatically if there is no any feedback after 7 ringer. The ARD interval time is10
seconds. Press any key can stop the ARD when it in ARD mode.
2.11
2.11 2.11
2.11 REDIAL
REDIAL REDIAL
REDIAL Key
Key Key
Key
In “Off-hook” mode press REDIAL Key can dial out the last number dialed (utmost
32 digits)
2.12
2.12 2.12
2.12 .[FLASH]
.[FLASH] .[FLASH]
.[FLASH] function
function function
function
Enters a 600 ms hook-switch flash for accessing special telephone system.
2.13 2.13 2.13 2.13 Store Store Store Store phone phone phone phone numbers numbers numbers numbers
Two-Touch Memory:
STORE: On-hook + Pre-dialed Phone SET/STORE + N (N=0—9,*, #)
DISPLAY: On-Hook + REC key + N (N=0—9,*, #)
Store Incoming Calls:
STORE: On-Hook + Incoming Calls + Store + N (N=0—9,*, #)
DISPLAY: On-Hook + REC key + N (N=0—9,*, #)
2.14 2.14 2.14 2.14 Dial Dial Dial Dial Two-Touch Two-Touch Two-Touch Two-Touch Memory Memory Memory Memory Numbers Numbers Numbers Numbers
Off Hook mode, press REC key + N (N=0—9,*, #) will dial the stored number.
3.
3.
3. 3. Handset
Handset
Handset Handset and
and
and and SPKR
SPKR
SPKR SPKR calling
calling
calling calling interconvert
interconvert
interconvert interconvert
a. From handset to speaker
Press [SPKR] then replace the handset in its cradle.