Quick start manual, a detailed manual is on the enclosed CD
2
P
OWER
SUPPLY
–
Two power inputs - redundant
–
Voltage range for version
66p
12-36V DC, and for version
77p
20-60V DC
–
Current consumption
66p
for 12V/ 850mA and 36V/ 300mA, and for version
77p
20V/ 520mA
and 60V/ 180mA
–
Voltage polarity - any for the version without PoE, but for the PoE version as shown below
(changing the polarity does not damage the device)
–
Screw connection for power supply
Fig. 7. Power connector
3
POE P
OWER
SUPPLY
(
OPTION
)
–
Compliant with the IEEE802.3af standard, IEEE802.3at
–
The device should be powered with 45-57V DC
–
The power available on each RJ45 port shall not exceed 30W.
–
For 55VDC power, the maximum total PoE power is 240W
4
F
IRST
START
-
UP
After connecting power supply with appropriate parameters to the inputs, the PWR LEDs should
light up green in the beginning. If only one of the power supply inputs is used, only one PWR diode
corresponding to this input will light up. The other LEDs indicate that the device is starting up and
is working properly. The device can be managed via any Ethernet port or USB interface via an RS-
232 console.
5
D
EFAULT
PARAMETERS
IP parameters:
Adress: 192.168.0.10
Mask: 0.0.0.0
Gate: 0.0.0.0
User: admin
Password: no password
SHORT USER MANUAL HYPERION-30x
5/7
REV.
20
21.03.31
V1.12