Bitstream 3x, Руководство пользователя

Страница: 13 / 79

USER MANUAL
Operating Modes of the Bitstream 3X
Differences between Standard mode and User mode
The Bitstream 3X has 2 operating modes: Standard and User.
Depending on the software or machine to control, one of the two modes will be used, it can be
changed at any time by pushing the button « Mode »
Standard Mode
The standard mode is pre-programmed, no configuration is required.
This mode is principally used by users who are used to the music software Propellerheads Reason,
Ableton Live, Native Instruments, or all other synthesizer software responding to MIDI.
Propellerheads Reason Mode
In addition to the “Standard Mode”, a new “Reason Mode” has been added from firmware version 1.1
and higher. This mode is pre-programmed for Propellerheads reason 3.0 and higher versions, fully
compatible with the Reason remote technology, the Bitstream 3X will be fully recognized by Reason
and pre-programmed.
For further information about this mode, please refer to the dedicated application note.
User Mode
The user mode gives access to all MIDI parameters which will be generated by the Bitstream 3X. The
user can thus configure complex parameters into the Bitstream 3X, either by using the menus or by
using configuration software.
Among the available parameters, there are Min & Max values for each control, the MIDI delays to
insert, the exclusive systems management, the chaining of controls and many others.
The table below lists the principle differences between the Standard and User modes:
Mode standard Mode User
Programming Required -
√
MIDI Generated Events Note / CC All (Including Sysexs)
Access to MIDI Parameters -
√
For more information, concerning User mode, see the chapter entitled « Assignment of MIDI
Parameters »
Menus associated to modes
Rev 1.1 - Page
13
Operating mode Standard
User
Selection of standard mode (pre-programmed)
Selection of User mode
Reason Selection of Reason mode