P 6
V2
Silver/M2 screws
If the pump cap has to be installed back to the pump, please note that there is a
protruding part at the bottom of cap. The protruding part needs to be put into the
side of the pump as shown. Do not turn the cap and the pump after installation.
Remark:
The SC6 pump features speed control
PWM. If powered directly from the power
supply, it will operate at full speed. The
function of speed control PWM can only
be managed by the motherboard's
software if connected to the mother-
board fan header.
A Negative electrode -
B Positive electrode
+
C Speed message FG
D Speed control PWM
A B C D
1
Install the water tank flap
SC6 Pump Spec.
Power/Voltage：12V DC
DC power：
≤
12W
Electric connector：Molex 4 Pin
Maximum revolution：5200±5％RPm
Noise：
≤
40 dBA
/
m
2
End result
Black/M3 Screw
(Fixed to case)
Plastic washer
Black/M3 Screw
Black/M3 Screw
Black/M3 Screw
Black/M3 Nut
Install the fans and reservoir on the radiator
2
Need translation
Need translation
Need translation
The flap must be installed
in the same direction as
shown in the image.
Opposite installation will
result in malfunction.
1
1
3
1
3
5
C
E
F
