INSTALLING THE SMART STRIP
®
Power Switch
This
LIGHTED SWITCH
is also a 15 amp circuit breaker. It is normally left on. If it’s
not lit, turn it on, reset it or try a different outlet.
Ground & Surge Indicator
When this is lit, your equipment is protected. If it’s not, it might be:
1.
A bad or unavailable ground, use another outlet.
2.
The surge protection has failed; check
http://bitsltd.net/FAQ
or call us.
Control Outlet
Plug your TV or computer here. This outlet controls the
SWITCHED OUTLETS
; if
the device plugged in here is on, they are on. If off or in sleep mode, they are off.
Constant Hot Outlets
Plug your Cable box, satellite receiver, DVR, fax or cable modem here. These
outlets will only turn off with the power switch.
Automatically Switched Outlets
Plug in all of your other accessories here. These will turn on or off with the
device plugged in the
CONTROL OUTLET
automatically. So when the device
in the control outlet is off or in sleep mode, everything here is electronically
unplugged, saving you energy and eliminating “Phantom Current” draw.
SETTING THE SENSITIVITY ADJUSTMENT
You may need to adjust the
Smart Strip’s
®
sensitivity. Fortunately, it’s easy to
calibrate using a small screwdriver.
First, plug a
CONTROL DEVICE
and
SWITCHED DEVICE
into the proper outlets and
test the Smart Strip
®
by turning the
Control Device
on and then off. If the
SWITCHED
DEVICE
turns on and off with the
CONTROL DEVICE
, you’re ready to go!
If the switched outlets do not turn on:
1.
Turn on the device that is plugged into the
CONTROL OUTLET
.
2.
Turn the dial slowly clockwise until the
SWITCHED OUTLETS
turn on.
3.
Turn off the device in the control outlet; if the
SWITCHED OUTLETS
are off,
you’re done.
If the switched outlets do not turn off:
1.
Turn off the device that is plugged into the
CONTROL OUTLET
.
2.
Turn the dial slowly counterclockwise until the
SWITCHED OUTLETS
turn off.
3.
Turn on the device that is on the
CONTROL OUTLET
; if the
SWITCHED
OUTLETS
are on, you’re done.
Содержание Smart Strip ECG-7MVR
Страница 1: ...User Guide Model ECG 7MVR...
