Bitronics M651 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 80

Bitronics M651 Скачать руководство пользователя страница 18

18

ML0039 November 14, 2013

Copyright 2013 Bitronics, LLC

Safety Requirements for Electrical Equipment for Measurement, Control, and
Laboratory Use – Part 2: Particular Requirements for Testing and Measuring Circuits

CSA C22.2 No. 61010-1-12-CAN/CSA, Edition 3, Issue Date 2012/05/01
CAN/CSA Safety Requirements for Electrical Equipment for Measurement, Control,
and Laboratory Use – Part 1: General Requirements
CSA C22.2 No. 61010-2-30-12-CAN/CSA, Edition 1 – Issue Date 2012/05/01
Safety Requirements for Electrical Equipment for Measurement, Control, and
Laboratory Use – Part 2-030: Particular Requirements for Testing and Measuring
Circuits

If applicable, the CE mark must be prominently marked on the case label.

European Community Directive on EMC 2004/108/EC and Directive
91/263/EC [TTE/SES].
European Community Directive on Low Voltage 2006/95/EC

Product and Generic Standards

The following product and generic standards were used to establish conformity:

Low Voltage (Product Safety)

IEC 61010-1, Edition 3, Issue Date 2013/02/01
Safety Requirements for Electrical Equipment for Measurement, Control, and
Laboratory Use – Part 1: General Requirements
IEC 61010-2-30, Edition 1 – Issue Date 2010/06/02
Safety Requirements for Electrical Equipment for Measurement, Control, and
Laboratory Use – Part 2-030: Particular Requirements for Testing and Measuring
Circuits

EMC:

EN 61326-1: 2013 (Supersedes EN61326-1: 2006), EN 61000-6-2: 2005,

EN 61000-6-4: 2007/ A1:2011 (IEC date 2010)

Radiated Emissions Electric Field Strength
EN 55011: 2009/ A1: 2010
EN 61000-6-4: 2007/ A1:2011 (IEC date 2010
Group 1, Class A
Frequency: 30 - 1000 MHz

AC Powerline Conducted Emissions
EN 55011: 2009/ A1: 2010
EN 61000-6-4: 2007/ A1:2011 (IEC date 2010
Group 1, Class A
Frequency: 150 kHz – 30 MHz

Electrostatic Discharge (ESD)
EN61000-4-2: 2009
Discharge voltage: ± 8 KV Air; ± 4 KV Contact & Additionally meets ± 6 KV Contact

«
...
16
17
18
19
20
...
»

Содержание M651

















































































Отзывы:

Нет отзывов