BITMAIN C1, Руководство пользователя

Страница: 3 / 9

C1 Manual
Last updated: 10/30/2014
Page 3 of
9
1 Overview
Bitmain’s first Liquid Cooled Server – the C1: This manual is only for C1’s set up, Cooling Kit is
direct supported by the third-party recommended.
Note:
1. You must prepare your own ATX Power Supply. There are 4 PCI-e connectors for +12V DC
input and all are required.
2. Cooling kit is not included in C1, please read the instruction at www.bitmaintech.com to
buy them.
2 Connect to Server
Step 1. Connect your server and PC via network cable.
Step 2. Enter server’s default IP address: 192.168.1.99 into your web browser, then login server
management interface, both of username and password is ‘root’ by default.
Step 3. Modify the IP address of the server. Click “Network

Settings” to modify the IP address
as shown in below screenshot. Choose ‘Save and Apply’ after modifying it.
*** If you decide to change the
server
's IP address, Please Write It Down & DO NOT FORGET
it. If you forget the IP address, you will not be able to access
server
again. ***
Page3 /
9