Bitfury B8 Open Miner — Quick Start Guide
5
3. Connecting to your Open Miner
Securely insert the Ethernet cable into Open Miner network port and the other end into
your router with DHCP enabled.
Now, plug the power cord into your Open Miner and into a power outlet. Green LED on
Orange Pi Zero should light on, it means that SD card is detected, and operating system
is loading now.
If green LED on Orange Pi Zero is switched off, you should repeat step 2 “Preparing SD
card” again.
Wait 60 sec. and locate Open Miner on the network using administrative interface of your
router (MAC addresses of Open Miners begin with 16:BF:00 or 16:BF:05):
You can connect to your Open Miner via
web interface:
http://[Open Miner IP Address],
for example:
http://192.168.1.224
Login: [email protected]
Password: Qw1Qw1Qw1
ATTENTION:
Please change Login and Password as soon as possible to prevent
unauthorized access to your Open Miner!
