FUNCTIONING
When starting the system, the
GHOST-T
puts in search of
GHOST-R
and try to connect with it automatically for three
times, then go on stand-by until you press the button to manually connect. The operation can be performed on both
the TX and RX.
This button is the first on the top, as you can see in the figure below.
On power-up, the
GHOST-T
retains its sound level that was present when it was turned off.
The lighting of the
GHOST-R
is done by holding down the ON-OFF, of blue color, button for 2 seconds and its output
level will default to last set level.
Alternate flashing of the LED red/green indicates that the modules are in research, while only a flashing green LED
indicates the correct radio link.
The buttons on the
GHOST-T
from the top are:
- Manual pairing
- Gain mik + (press twice)
- Gain mik - (press twice)
The buttons on the
GHOST-T
from the top are:
- Manual pairing
- Gain mik + (press twice)
- Gain mik - (press twice)
The buttons on the
GHOST-R
from the top are:
- Manual pairing
- Headset
- Headset volume -
The buttons on the
GHOST-R
from the top are:
- Manual pairing
- Headset
- Headset volume -