TM
4.
assembling your yikes! compact deep
cleaner is a simple process. the only
thing you will need to assemble your
cleaner is a phillips head
screwdriver.
1.
Slide the back plate of the flex hose clip into the
opening on the front of the unit. You will hear a
“snap” when it is locked in place.
2.
Take the flex hose storage bracket and slide the
lower plate into the opening on the back of unit.
Make sure the screw holes line up.
3.
Insert screw and tighten with a screwdriver.
4.
Wrap the flex hose around unit and place hose
grip into bracket. Turn bracket latch clockwise to lock
in place.
5.
Slide 2-in-1 crevice tool holder into slit on flex hose
storage bracket place tool on clip.
Getting ready
1.
To fill the clean water tank.
a.
Remove the tank by lifting it straight up and
then away from the unit.
B.
Unscrew the black cap at the bottom of the
clean/solution tank.
c.
Add Pawsitively Clean Compact Machine formula
to the FORMULA fill line on the clean/solution tank.
Fill the clean water tank with hot (NOT boiling) tap
water to the WATER fill line.
D.
Screw cap back on and replace the clean water
tank by lining up the vertical guides on the left
side of the unit with the indentations on the
clean water tank and gently sliding it down into
position.
2.
Unwrap vacuum flex hose completely from
onboard hose storage.
3.
Attach your selected cleaning tool to the spray
trigger unit by pressing tool onto spray trigger
firmly until the button lock snaps into hole. Make
certain the tool is securely attached.
O
peration
6
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
A
ssembly
1a.
1.
1c.
3.
3.
5.
2.
1B.
1D.
2.
