BISSELL.com
5
Cleaning Your Carpet
(continued)
IMPORTANT
»
Please check manufacturer’s tag before cleaning area rugs for any specialized cleaning instructions. We do not recommend deep
cleaning delicate, silk, wool, antique, or area rugs without a manufacturer’s tag.
»
Do not overwet carpet. Be careful not to run over loose objects or edges of area rugs. Stalling the brush may result in premature
belt failure.
4.
Make cleaning passes as described below. Repeat these passes until solution being pulled up
appears clean. Empty the Dirty Water Tank and refill the Clean Water Tank as needed.
1. Hold Spray Trigger
• 1 pass forward
• 1 pass back
2. Release Spray Trigger
• 1 pass forward
• 1 pass back
1.
Turn OFF and unplug your
machine.
2.
Release Dirty Water Tank
by pulling out and up on the
latches on the side.
3.
Carefully remove tank by
lifting up on the Dirty Water
Tank Handle.
4.
Lift tab on the top of the
tank.
5.
To empty, pour out dirty
water using opening at back of
tank. Rinse the tank thoroughly.
Reinsert tab into tank.
6.
To continue cleaning, align
the bottom of the tank to the
base and secure into place
with latches.
Emptying the Dirty Water Tank
For maintenance how-to videos, visit
support.BISSELL.com
.
