www.BISSELL.com.au
6
2.
3.
4.
5.
WARNING
Keep spray away from face. Failure to do so may
result in personal injury.
IMPORTANT
Check the manufacturer’s tag before
cleaning upholstery. Test a small, hidden
area for colourfastness. If colour is
affected, do not use. If manufacturer’s
tag is missing or not coded, check with
your furniture dealer.
Operations
Cleaning with your Spot Cleaner
1.
Plug unit in and turn on by pressing power
button.
2.
Hold cleaning tool approximately 2.5cm
above soiled surface. Press spray trigger to
apply cleaning solution to soiled area.
3.
Using the brush on the cleaning tool, gently
scrub area to be cleaned.
4.
For thorough cleaning, spray additional
solution while brush and suction are in
contact with surface.
5.
Apply downward pressure on cleaning
tool and pull it toward you. The suction
will remove the dirt and cleaning solution.
Continue until no more dirt can be removed.
6.
As a final step, use “drying strokes” (by not
pressing the spray trigger) to remove as
much liquid/moisture as possible. Repeat this
step as often as necessary.
Emptying the Dirty Water Tank
1.
When the Dirty Water Tank reaches the
“FULL”
line on the tank it is time to empty.
2.
Remove Dirty Water Tank and carry to a utility
sink, toilet or outside (where you will
dispose of the dirty water).
3.
To unlock the Dirty Water Tank lid, rotate handle
over the back of the tank. Remove lid and pour
out dirty water. Rinse out Dirty Water Tank
to remove any debris.
4.
Replace top of tank, and rotate the handle
forward to lock in place on front of tank.
5.
Before replacing tank on machine, wipe debris
from red filter.
Cleaning your Machine
1.
Remove and rinse the tools under clean,
running water. Allow tools to dry.
2.
It is recommended that you suction clean
water from a bowl to rinse out the hose. Then
lift end of hose and stretch out to ensure all
water is cleared from hose.
3.
Wrap the Flex Hose around the hose wrap and
secure with latch.
For best results
empty, rinse and
dry tanks and tools
before storing.
Tip
