www.BISSELLdirect.co.uk
7
Pre-Treating
5
Select desired tool for spot cleaning,
Insert tool on end of hose until it
clicks into place.
Check the manufacturer’s tag before
cleaning rugs and upholstery
1
2
3
4
Hold the 3” tough stain tool just above
the carpet or upholstery to be cleaned.
Press the trigger to mist solution over
the soiled area.
Let cleaning solution set for 5 minutes
before cleaning. To lift the stain away,
apply downward pressure on the tool
and slowly pull it toward you. Then use
“drying strokes” (by not pressing down
trigger) to remove remaining moisture.
Repeat as needed.
IMPORTANT:
Check the manufacturer’s tag before cleaning rugs and upholstery.
WHY PRETREAT?
Cleaning effectiveness will be enhanced if you pre-treat
heavily stained or highly soiled areas.
Release the flex hose from the hose grip
bracket. Unwrap flex hose completely
from around the unit.
Twist the Quick Release
™
cord wrap
clockwise to quickly unwrap power cord.
Plug in unit and press power button
beneath the handle to turn it ON.
5
6
