background image

 

  

 e. 

Replace the tank by lining up tank 

bottom with indentations on machine. 

Press down firmly on tank to secure in 

position. 

2. 

Release the flex hose from the hose grip bracket. 

Unwrap flex hose completely from around the unit.

3. 

Select desired tool for spot cleaning. Insert 

tool on end of hose until it clicks into place. 

Pre-treating

Cleaning effectiveness will be enhanced if you 

pre-treat heavily stained or highly soiled areas. 

Here’s how to do it:

1. 

Attach the Tough Stain Tool to the handheld 

cleaning hose. (You will hear a click when it is 

properly attached.)

2. 

Press the power button beneath the handle 

to turn it on. (Make sure unit is fully charged by 

checking the battery status indicator lights)

3. 

Hold the Tough Stain Tool just above the carpet 

or upholstery to be cleaned. Press the trigger to 

mist solution over the soiled area. For the 3-n-1 

Stair Tool, follow instructions on page 7.

4. 

Wait 3-5 minutes before cleaning. 

Cleaning with the Tough Stain Tool

1. 

Attach the Tough Stain Tool to the handheld 

cleaning hose. (You will hear a click when it is 

properly attached.)

2. 

Press the power button beneath the handle 

to turn it on. (Make sure unit is fully charged by 

checking the battery status indicator lights)

3. 

Hold the tool 2.5 cm above soiled surface.

4. 

Press the spray trigger to mist solution over 

and onto the soiled area.

5. 

Release the spray trigger and gently scrub  

the stain.

6. 

To lift the stain away, apply downward  

pressure on the tool and slowly pull it toward you.  

Watch as powerful suction removes the  

dirt and cleaning solution. Continue until no more 

dirt can be removed. 

7. 

As a final step, use “drying strokes” (by not 

pressing the spray trigger) to remove as much 

moisture as possible. Repeat this step as often  

as necessary.

NOTE: BISSELL Oxygen Boost formula will 

continue to clean oxidizable stains for 6-8 hours.

Operations

www.BISSELL.com      

WARNING

Keep spray away from face. Failure to do  

so may result in personal injury.

IMPORTANT

Check the manufacturer’s tag before 

cleaning upholstery. “W” or “WS” on the tag 

means you can use your SpotClean. If tag 

is coded with an “S” (with diagonal strike-

through), or says “Dry Clean Only,” do not 

proceed. If manufacturer’s tag is missing or 

not coded, check with your furniture dealer.

6

1e.

3.

»  Deep cleaning stairs and high-traffic areas on a regular 

basis helps prolong carpet life. 

»  Check upholstery stuffing before cleaning. Coloured 

stuffing may bleed through the fabric when it 

becomes wet.

»  Before turning off the machine, suction up clean 

water to thoroughly rinse out the interior of the flex 

hose. Then, lift the cleaning tool and point it upwards 

to drain any remaining water into the dirty water/

collection tank.

Tips

Содержание SPOTCLEAN CORDLESS 1923 SERIES











Отзывы: