www.BISSELL.com.au
12
To clean, push the SPRAY Button to
dispense formula.
Formula will spray out of the nozzle on
the front of the foot. You should hear a
soft buzzing noise each time you press
the SPRAY Button to indicate formula
being dispensed.
For more difficult and stuck-on messes, spray formula directly on mess and line
up one of the mop pads parallel to the mess. Move mop pad over mess and slowly
move machine back and forth to clean, continuing to spray formula as needed.
4
6
5
NOTE:
When finished cleaning, make sure to push the OFF Button before standing the
machine upright as the mop pads will continue to spin until the machine is turned OFF.
Cleaning Sealed Hard Floors (cont’d)
3
To power OFF the unit, press the unit ON/OFF
Button and put unit into upright position. The
LED lights will turn OFF.
NOTE:
If unit is ON and gets placed in the upright position while still ON, unit will go
into standby mode. To power OFF, press the ON/OFF Button or the unit will turn OFF
by itself after 10 seconds of no action. You will know it is OFF when the LED lights are
no longer illuminated.
