P
repared by Monique Lania
10
Call Servicing Guide QuickWash
1950F.doc
Consumer states
no suction
Solution 1:
Solution 2:
Yes, problem solved
No
Empty collection tank, refill solution tank
Remove the dirty water collection tank
Remove any debris in the red rectangular rubber gasket at the
motor intake ** NOTE: Gasket may be black on older models.
Before replacing dirty water collection tank turn the unit on. At
the Motor intake feel for suction. Is there suction?
No, Refer consumer to an Authorized Service Center
Yes, proceed to solution 2
Remove any debris from the black foam filter in the dirty water collection tank
No, remove dirty water tank and re-install, making sure to
follow installation instructions carefully. Turn on unit. Does
unit suck up water now?
No, refer consumer to an Authorized Service Centre
Is the dirty water collection tank damaged?
Yes, problem solved
Check holes on blue spray bar on the base of the unit next to the brush head
Straighten a paper clip and clean out the tiny holes on the spray bar with the
tip of the paper clip to remove debris. Is there suction now?
Yes, advise customer to call Bissell
Free Call 1800 number again and
press
Option 4
for spare parts and
order a replacement dirty water
(collection) tank
