background image

3

IMPORTANT SAFETY INSTRUCTIONS

Use only manufacturer’s recommended 
attachments.

Use only cleaning products formulated by 
BISSELL for use in this appliance.

Keep openings free of dust, lint, hair, etc.

Do not point attachment nozzle at people 
or animals.

Keep appliance on a level surface.

Turn off all controls before unplugging.

Unplug before attaching the TurboBrush

.

Be extra careful when cleaning stairs.

Close attention is necessary when used by 

or  near children.

SAVE THESE INSTRUCTIONS.

THIS MODEL IS FOR HOUSEHOLD USE ONLY.
Commercial use of this unit voids the 
manufacturer’s warranty.

GROUNDING INSTRUCTIONS

This appliance must be connected to a grounded
wiring system. If it should malfunction or break
down, grounding provides a safe path of least
resistance for electrical current, reducing the risk
of electrical shock. The cord for this appliance
has an equipment-grounding conductor and a
grounding plug. It must only be plugged into an
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.

WARNING:

Improper connection

of the equipment-grounding conductor can
result in a risk of electrical shock. Check
with a qualified electrician or service person
if you aren’t sure if the outlet is properly
grounded. DO NOT MODIFY THE PLUG. If 
it will not fit the outlet, have a proper 
outlet installed by a qualified electrician.
This appliance is designed for use on a
nominal 120-volt circuit, and has a
grounding attachment plug that looks like
the plug in the drawing above. Make cer-
tain that the appliance is connected to an 
outlet having the same configuration as
the plug. No plug adapter should be used
with this appliance.

When using an electrical appliance, basic
precautions should be observed, including
the following:

Read all instructions before using your 
PROHEAT PRO-TECH.

WARNING:

To reduce the risk of

fire, electric shock, or injury:

Do not immerse.

Use only on surfaces moistened by 

cleaning process.

Always connect to a properly grounded outlet.

See Grounding Instructions.

Unplug from outlet when not in use and before

conducting maintenance or troubleshooting.

Do not leave machine when it is plugged in.

Do not service machine when it is plugged in.

Do not use with damaged cord or plug.

If appliance is not working as it should, has

been dropped, damaged, left outdoors, or
dropped in to water, have it repaired at an
authorized Service Centre.

Do not expose to rain, store indoors.

Do not pull or carry by cord, use cord as a han-

dle, close door on cord, pull cord around sharp
corners or edges, run appliance over cord, or
expose cord to heated surfaces.

Do not carry the appliance while in use.

Do not unplug by pulling on cord. Unplug by

grasping the plug, not the cord.

Do not handle plug or appliance with wet hands.

Do not put any object into appliance openings,

use with blocked opening, or restrict air flow.

Do not expose hair, loose clothing, fingers

or body parts to openings or moving parts.

Do not pick up hot or burning objects.

Do not pick up flammable or combustible materials
(lighter fluid, gasoline, kerosene, etc.) or use in the
presence of explosive liquids or vapours.

Do not use appliance in an enclosed space filled

with vapours given off by oil base paint, paint thinner,
some moth proofing substances, flammable dust, or
other explosive or toxic vapours.

Do not pick up toxic material (chlorine bleach,

ammonia, drain cleaner, gasoline, etc.).

Do not modify the 3-prong grounded plug.

Do not allow to be used as a toy.

Do not use for any purpose other than

described in this User’s Guide.

Do not operate the appliance unless the belt door

is securely assembled in the location provided.

Grounded

Outlets

Grounding Pin

Содержание ProHeat Pro-Tech 7901 SERIES

























Отзывы: